Fermentation Tank for Chemical Industry by China Suppliers — Standard Design from Our Factory

The fermentation tank designed by our factory is a standard tank type, which adopts a jacket type when the nominal volume is below 6M3. The cooling or heating of fermentation gas is completed by a jacket. When the nominal volume is above 6M3, the cooling of the fermentation gas is carried out by a vertical exhaust pipe. We have made improvements in the connection of the exhaust pipes inside the tank. This mainly avoids opening more holes on the tank body and creating blind spots. This continuous method has achieved satisfactory results in practical use.

The types of fermentation equipment tanks can be divided into two categories: one is the cone type for anaerobic fermentation (such as alcohol fermentation), and the other is the tank type for anaerobic fermentation (such as standard, Wu type, self suction type, etc.). This type of equipment is particularly commonly used in standard tank types. The drawing materials of the fermentation tank series designed by our factory belong to the standard tank type.

When designing fermentation equipment of various specifications, it is important to ensure a tight design structure, sufficient strength and service life, with minimal internal accessories and a smooth surface. It is important to note that the equipment should have good gas to gas contact and gas to solid mixing performance, enabling effective material transfer and gas exchange. There is a heat exchange area that allows fermentation to take place at an appropriate temperature. Pay attention to the sealing performance of the equipment to ensure sterilization operations.