Stainless Steel Seed Tanks for Biochemical Fermentation - China Suppliers & Factory
Description
Our factory produces two types of seed tanks: carbon steel and stainless steel. Mainly used for biochemical fermentation production, such as producing monosodium glutamate, citric acid, enzyme preparations, glycerol, pharmaceuticals, food and other industries. The specification parameters are shown in the table below.
There are jacket type, inner coil tube type, and outer ring tube type for cooling and heating, available for users to choose.
Heating Method
The cooling and heating forms include jacket type, inner coil tube type, and outer ring tube type, available for users to choose from.
Structure & Operating Guidelines
The steam pressure used in this equipment shall not exceed the nuclear rated working pressure.
When intake, the intake valve should be slowly opened until pressure is required. A drain should be installed outside the condensate outlet.
The safety valve can be adjusted according to the user's own steam pressure. Excessive use is not allowed.
During use, it is important to regularly pay attention to changes in steam pressure and adjust the intake valve in a timely manner.
After discontinuing use, be sure to drain any remaining water inside the jacket.
After each use, clean the inside of the tank and keep it clean.
Application & Structural Characteristics
Mainly used for mother liquor fermentation, brewing, and fungal support, which means it can be used for heating, insulation, and cooling. Its varieties mainly include carbon steel and stainless steel.
The structural characteristics of a seed jar mainly include the following:
- Main Body: Its main body mainly includes the tank body, support legs, etc. The inner liner of the tank body is generally polished to lubricate its inner wall.
- Insulation Layer: The insulation layer is made of glass asbestos to provide good insulation.
- Sealing Performance: The agitator and lid of the pot are sealed with mechanical seals to provide outstanding sealing performance.
Specification Parameters
| Volume (M³) | Shell Diameter (mm) | Shell Height (mm) | Heat Exchange Area (M²) | Mixing Shaft Speed (r.p.m) | Motor (KW) |
|---|---|---|---|---|---|
| 0.05 | 300 | 700 | 400 | 300-350 | 0.55 |
| 0.1 | 400 | 800 | 500 | 300-350 | 0.75-1.1 |
| 0.2 | 500 | 1000 | 600 | 280-340 | 0.75-1.5 |
| 0.3 | 550 | 1200 | 650 | 280-340 | 1.1-1.5 |
| 0.5 | 600 | 1650 | 700 | 280-320 | 1.5-2.2 |
| 0.8 | 800 | 1600 | 900 | 200-280 | 2.2-5.5 |
| 1.0 | 800 | 1900 | 900 | 200-280 | 2.2-5.5 |
| 1.2 | 900 | 1800 | 1000 | 200-280 | 3-7.5 |
| 1.5 | 900 | 2200 | 1000 | 200-280 | 3-7.5 |
| 2.0 | 1000 | 2500 | 1100 | 200-260 | 4-11 |
| 3.0 | 1200 | 2600 | 1300 | 200-260 | 5.5-11 |
| 4.0 | 1300 | 3000 | 1400 | 200-220 | 7.5-15 |
| 5.0 | 1400 | 3200 | 1500 | 180-220 | 7.5-18.5 |